Indesit CJ65S G17(W) RU/HA Návod k použití stáhnout pdf (Strana 18)

Table of burner and nozzle specifications

Table 1 Liquid Gas Natural Gas

Diameter

(mm)

Thermal Power

kW (p.c.s.*)

By Pass

1/100

Nozzle

1/100

Flow*

g/h

Nozzle

1/100

Flow*

l/h

Nozzle

1/100

Flow*

l/h

Burner

Nominal Reduced (mm) (mm) *** ** (mm) (mm)

Fast

(Large)(R)

100 3.00 0.7 41 86 218 214 116 286 143 286

Semi Fast

(Medium)(S)

75 1.90 0.4 30 70 138 136 106 181 118 181

Auxiliary

(Small)(A)

55 1.00 0.4 30 50 73 71 79 95 80 95

Triple Ring

(TC)

130 3.25 1.5 63 236 232 309 309

Oven - 2.60 1.0 52 78 189 186 119 248 132 248

Supply

Pressures

Nominal (mbar)

Minimum (mbar)

Maximum (mbar)

28-30

6,5

* At 15°C 1013 mbar-dry gas *** Butane P.C.S. = 49,47 MJ/Kg

Propane

P.C.S. = 50,37 MJ/Kg Natural P.C.S. = 37,78 MJ/m³

TECHNICAL DATA

Oven Dimensions

HxWxD

31x41x41 cm

Volume

Useful

measurements

relating to the

oven compartment

width 46 cm

th 42 cm

hei

ht 8,5 cm

Voltage and

frequency

see data

late

Burners

be ada

ted for use with an

e of

as shown on the data

late.

EC Directives 2006/95/EC dated

12/12/06 (Low Voltage) and

subsequent amendments -

04/108/EC dated 15/12/04

(Electromagnetic Compatibility)

and subsequent amendments -

2009/142/EC dated 30/11/09 (Gas)

1275/2008(Stand-by/Off-mode)

CJ 65S G17 RU /HA

58l

3. Having adjusted the flame to the required low

setting, while the burner is alight, quickly change

the position of the knob from minimum to

maximum and vice versa several times, checking

that the flame does not go out.

4. Some appliances have a safety device

(thermocouple) fitted. If the device fails to work

when the burners are set to the low flame setting,

increase this low flame setting using the adjusting

screw.

5. Once the adjustment has been made, replace the

seals on the by-passes using sealing wax

! If the appliance is connected to liquid gas, the

regulation screw must be fastened as tightly as

possible.

! Once this procedure is finished, replace the old

rating sticker with one indicating the new type of gas

used. Stickers are available from any of our Service

Centres.

! Should the gas pressure used be different (or vary

slightly) from the recommended pressure, a suitable

pressure regulator must be fitted to the inlet pipe (in

order to comply with current national regulations).

TC A

2x65

2x99

2x107

1. Turn the tap to the low flame position.

2. Remove the knob and adjust the adjustment

screw, which is positioned in or next to the tap pin,

until the flame is small but steady.

• Adjusting the burners’ primary air :

Does not require adjusting.

• Setting the burners to minimum:

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Komentáře k této Příručce

Žádné komentáře

Indesit CJ65S G17(W) RU/HA Návod k použití Strana 18

Komentáře k této Příručce

Související produkty a manuály pro Kuchyňské a domácí potřeby Indesit CJ65S G17(W) RU/HA