Indesit MBL 1901 FA T Návod k použití stáhnout pdf (Strana 2)

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully. They

contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free

room.

2. Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good

ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part

of the appliance and any furniture above it, and at

least 5 cm between the sides and any furniture/side

walls.

4. Ensure the appliance is away from any sources of

heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers

supplied in the installation kit, following the

instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully

place it vertically and wait at least 3 hours before

connecting it to the electricity mains. Before inserting

the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant

with the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located

on the bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values

indicated on the data plate located on the bottom left

side (e.g. 220-240V).

• The socket is compatible with the plug of the

appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it (

see Assistance

Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should

these safety measures not be observed.

Connection of the water supply

To carry this out, use the kit provided which contains all

the necessary elements for connection to the water

supply.

To improve the performance of the Aqua Care, we

recommend that you fit a tap with a filter on the pipe for

the connection to the water system: in this way it will be

possible to manually interrupt the water supply during

long periods in which Aqua Care is not used.

! The water pressure inside the water system must be

between 0.8 bar and 8 bar.

! The appliance must only be connected to a water

supply suitable for drinking.

Aqua Care function

The refrigerator you have purchased is fitted with the

Aqua Care system which, thanks to an advanced filter

system with active carbons, provides your household

with fresh, filtered water.

! To improve the system’s performance, we recommend

that you follow the instructions contained in this manual

and in the assembly diagram provided with the kit.

Starting Aqua Care

After connecting it to the water system, installing the

filter (see Replacing Aqua Care filter) and switching on

the refrigerator (See Starting the appliance), it is

necessary to remove any air from the Aqua Care

system:

1. Activate the AQUA CARE

function by pressing the correct

button (see Control panel).

2. Place a container under the

dispenser.

3. Hold the button down until the

water is dispensed.

4. Drain and discard three litres

of water.

! When using for the first time and each time the Aqua

Care system is not used for more than 1 week, it will be

necessary to drain and discard three litres of water.

1 2 3 4 5 6 7 ... 47 48

Komentáře k této Příručce

Žádné komentáře

Indesit MBL 1901 FA T Návod k použití Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Ledničky s mrazničkou Indesit MBL 1901 FA T