Indesit MBL 1901 FA T Návod k použití stáhnout pdf (Strana 5)

Accessories

Refrigerator compartment

SHELVES: with or without grill.

Due to the special guides the

shelves are removable and the

height is adjustable (

see

diagram

), allowing easy

storage of large containers

and food. Height can be

adjusted without complete

removal of the shelf.

FRESH BOX: for fresh meat

and fish. Due to the

compartment’s low temperature

(the coldest in the refrigerator)

and to the clear door that

provides protection against

oxidation and blackening, food

can be stored for even up to

one week. It can also be used

for “cold meals.”

CAN RACK shelf: stores cans

horizontally (

see diagram

Yoghurt, butter or general

containers may also be stored

here.

ODOUR FILTER: Some

models are fitted with a new

odour filter with active

carbons, which ensures better

air quality inside the

refrigerator.

The filter is located on the

bottom right-hand side, inside

the ventilation opening.

TEMPERATURE Indicator light: to identify the coldest

area in the refrigerator.

1. Check that OK appears clearly on the indicator light

(

see diagram

vert

noir

consulter la notice

2. If the indicator light is completely black it means

that the temperature is too high: adjust the

REFRIGERATOR OPERATION knob to a higher

position (colder) and wait approximately 10 hours

until the temperature has been stabilised.

WATER LEVEL

MAX

WATER LEVEL

MAX

WATER LEVEL

MAX

3. Check the indicator light again: if necessary, readjust

it following the initial process. If large quantities of

food have been added or if the refrigerator door has

been opened frequently, it is normal for the indicator

not to show OK. Wait at least 10 hours before

adjusting the REFRIGERATOR OPERATION knob to a

higher setting.

Freezer compartment

ICE CARE tray

The fact that they are situated on the top part of the

freezer drawers ensures greater cleanliness: the ice no

longer comes into contact with the food placed inside

the freezer compartment; furthermore, the dripping of

the water during filling is avoided (a lid to cover up the

hole after filling with water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with

water through the opening provided.

2. Take care not to exceed the level indicated (MAX

WATER LEVEL). Excess water prevents the ice cubes

from dispensing (if this happens, wait for the ice to

melt and empty the tray).

3. Turn the tray 90°: due to the connected compartments

each mould fills with water (

see diagram

4. Close the opening with the lid provided and put the

tray back.

5. When the ice has formed (minimum time

approximately 8 hours) knock the tray against a hard

surface and wet the outside so that the ice cubes

come loose and take them out through the opening.

1 2 3 4 5 6 7 8 9 10 ... 47 48

Komentáře k této Příručce

Žádné komentáře

Indesit MBL 1901 FA T Návod k použití Strana 5

Komentáře k této Příručce

Související produkty a manuály pro Ledničky s mrazničkou Indesit MBL 1901 FA T